USB 10GbE Adapter
WP-UT9
Overview
WP-UT9 is a high-speed USB Ethernet adapter that provides up to 10GbE (10 Gigabit Ethernet) connectivity for PCs and other hosts.
Key Features
Up to 10GbE (backward compatible with 5G / 2.5G / 1G / 100M / 10M)
Recommended host interface: USB 3.2 Gen2 (backward compatible; performance may vary on slower ports)
Auto-negotiation
Two LEDs: Amber (Link) / Green (Activity)
Setup
Connect WP-UT9 to your host using a cable via the USB female port
Plug an RJ45 Ethernet cable into WP-UT9 and connect it to a router/switch
The system will detect and connect automatically
For best performance, connect directly to a host USB port. Avoid low-speed hubs/adapters when possible.
Driver Note
Most systems support plug-and-play. Some systems or specific OS versions/environments may require driver installation. For the latest drivers and support information, please visit Realtek’s official page: https://www.realtek.com/Download/List?cate_id=585
Cable Recommendation
10GbE: CAT6A or above
5G / 2.5G: CAT6
1GbE or below: CAT5e or above
LED Indicators
Amber (Link): Solid on = Link established
Green (Activity): Blinking = Data activity (traffic)
Notes
For best 10GbE performance, use a USB 3.2 Gen2 host port and a high-quality cable
Throughput may be reduced when using hubs/docks/long cables
Surface warming under high load is normal
Last updated